-40%

2007 Lund Classic SS 1775 Deep V Vee Hull Mercury 4 Stroke iPilot Helix Boat

$ 9768

Availability: 91 in stock
  • Year: 2007
  • Trailer: Included
  • For Sale By: Private Seller
  • Length (feet): 17
  • Deposit amount: 300.0
  • Engine Model: Mercury 75 4 stroke EFI
  • Make: Lund
  • Model: 1775 Classic SS
  • Hull Material: Aluminum
  • Deposit type: 1
  • Engine Make: Mercury Engine
  • Engine Type: Single Outboard
  • Condition: Used
  • Use: Fresh Water

    Description

    Up for sale is a 2007 Lund Classic SS v hull aluminum boat. This boat has just went over an entire restoration! I have restored about 50 boats in the past, its a hobby. I bought the boat in April at a dealer, with the intent in needed cosmetic work. So First let me list all the new items, Minn Kota Power Drive ipilot 70lb thrust 24v with remote control, has the anchor lock function, paid 00 w/ram mount for trailering at Runnings. Humminbird Helix 7 with side imaging and Maps for Most areas in our region. This cost 0 with maps and cover! It sits on a heavy duty Ram mount for up to a helix 12, Thats 0. It has a Helix 5 gps up front hooked to the Minn Kota, 0 with Ram mount and Lund Mount and Cover and cable for the Helix to talk to the powerdrive! A new 2 bank 10amp Minn Kota Precision battery charger, with 3 new Interstate batteries, 2 size 29 on the bow for the trolling motor and a size 24 in the back for the motor 0. Boat has all new safety equipment 4 life vest, 2 anchors, horn, paddle, ropes, anchor ropes, bumpers, etc. 0 Has a safety boarding ladder in the back, this was almost 0. New spare tire 0 on factory rim. Boat has a factory Lund snap trailerable cover! Now on to the motor, its a 2007 Mercury 75hp Fuel injected 4 stroke, 400 hours, new oil, filter, impeller, spark resistor, new Mercury Starter, New Mercury Prop, fully gone through by a Mercury dealer! Now what I have done to the boat, All flooring removed, cover in factory Midnight Star Lund carpet, with proper glue and stainless staples, exactly like factory, the bottom floor was replaced, with 3/4 x 4 x 10 marine grade plywood, resin coated on all sides 3 times, recovered in factory vinyl, done exactly like factory other then the resin, so better then factory, The cost of all of this was about 00 in material and thats no labor charge. A new factory console, the original one was cracked from the electronics they had mounted, 0 no labor cost, Boat was fully cleaned, washed, scrubbed, acid washed, buffed, touched up with factory paint, catalyst paint, not just cheap paint, it was 0 in paint. Boat was then ceramic coated. decals touched up, I have alot invested in this boat. When the floor was pulled all foam was cleaned and the gas tank was pulled and rinsed, all the electrical was done, everything works as it should, no half ass repair anywhere! I have about 150 hours in the boat, and most boat repair places charge 0 and hour thats 000 in labor and I promise they dont do this level of work. The trailer is a Shorelandr galvanized Lund Trailer, looks like new!